PUBLICATIONS

2023

Bakar N.A.A., Salleh N.A., Hamid N.A.A., Abdullah C.A.C., Rahiman W., Kheawhom S., Mohamad A.A., Electrochemical Characterization of Cleaning Nickel Foam Current Collector for Supercapacitor Application, 2023, Lecture Notes in Mechanical Engineering, 145-158, DOI:10.1007/978-981-19-1851-3_13

 

2022

Khezri R., Rezaei Motlagh S., Etesami M., Mohamad A.A., Mahlendorf F., Somwangthanaroj A., Kheawhom S., Stabilizing zinc anodes for different configurations of rechargeable zinc-air batteries, 2022, Chemical Engineering Journal, 449, 137796, DOI:10.1016/j.cej.2022.137796

 

Etesami M., Khezri R., Abbasi A., Nguyen M.T., Yonezawa T., Kheawhom S., Somwangthanaroj A., Ball mill-assisted synthesis of NiFeCo-NC as bifunctional oxygen electrocatalysts for rechargeable zinc-air batteries, 2022, Journal of Alloys and Compounds, 922, 166287, DOI:10.1016/j.jallcom.2022.166287

 

Benrezgua E., Deghfel B., Zoukel A., Basirun W.J., Amari R., Boukhari A., Yaakob M.K., Kheawhom S., Mohamad A.A., Synthesis and properties of copper doped zinc oxide thin films by sol-gel, spin coating and dipping: A characterization review, 2022, Journal of Molecular Structure, 1267, 133639, DOI: 10.1016/j.molstruc.2022.133639

 

Etesami M., Nguyen M.T., Yonezawa T., Tuantranont A., Somwangthanaroj A., Kheawhom S., 3D carbon nanotubes-graphene hybrids for energy conversion and storage applications, 2022, Chemical Engineering Journal, 446, 137190, DOI: 10.1016/j.cej.2022.137190

 

Maeboonruan N., Lohitkarn J., Poochai C., Lomas T., Wisitsoraat A., Kheawhom S., Siwamogsatham S., Tuantranont A., Sriprachuabwong C., Dendrite suppression with zirconium (IV) based metal-organic frameworks modified glass microfiber separator for ultralong-life rechargeable zinc-ion batteries, 2022, Journal of Science: Advanced Materials and Devices, 7, 3, 100467, DOI: 10.1016/j.jsamd.2022.100467

 

Chinnakutti K.K., Patra L., Panneerselvam V., Govindarajan D., Kheawhom S., Theerthagiri J., Yu Y., Salammal S.T., Choi M.Y., Lithium inserted ZnSnN2 thin films for solar absorber: n to p-type conversion, 2022, Materials Today Chemistry, 25, 100957, DOI: 10.1016/j.mtchem.2022.100957

 

Amari R., Benrezgua E., Deghfel B., Abdelhalim Z., Kamil Yaakob M., Jeffrey Basirun W., Boukhari A., Kheawhom S., Azmin Mohamad A., Ni doping effect on the electronic, structural and optical properties of ZnO nanoparticles prepared by Co-precipitation route, 2022, Optical Materials, 128, 112398, DOI: 10.1016/j.optmat.2022.112398

 

Abbasi A., Xu Y., Khezri R., Etesami M., Lin C., Kheawhom S., Lu Y. Advances in characteristics improvement of polymeric membranes/separators for zinc-air batteries, 2022, Materials Today Sustainability, 18, 100126, DOI: 10.1016/j.mtsust.2022.100126

Benrezgua E., Zoukel A., Deghfel B., Boukhari A., Amari R., Kheawhom S., Mohamad A.A.       A review on DFT + U scheme for structural, electronic, optical and magnetic properties of copper doped ZnO wurtzite structure, 2022, Materials Today Communications, 31, 103306, DOI: 10.1016/j.mtcomm.2022.103306

 

Motlagh S.R., Khezri R., Harun R., Biak D.R.A., Hussain S.A., Chee C.Y., Kheawhom S., Kinetic and thermodynamic studies of eicosapentaenoic acid extraction from Nannochloropsis oceanica using tetramethyl ammonium chloride and microwave irradiation, 2022, PLoS ONE, 17, e0267626, DOI: 10.1371/journal.pone.0267626

 

Kao-ian W., Mohamad A.A., Liu W.-R., Pornprasertsuk R., Siwamogsatham S., Kheawhom S., Stability Enhancement of Zinc-Ion Batteries Using Non-Aqueous Electrolytes, 2022, Batteries and Supercaps, 5, e202100361, DOI: 10.1002/batt.202100361

 

Sim W.J., Nguyen M.T., Huang Z., Kheawhom S., Wattanakit C., Yonezawa T., Efficient iron-cobalt oxide bifunctional electrode catalysts in rechargeable high current density zinc-air batteries, 2022, Nanoscale, 14, 22, 8012-8022, DOI: 10.1039/d2nr01258h

 

Said M., Sharif N.M., Nazeri M.F.M., Kheawhom S., Mohamad A.A.   Comparison of intermetallic compound growth and tensile behavior of Sn-3.0Ag-0.5Cu/Cu solder joints by conventional and microwave hybrid heating, 2022, Journal of Materials Research and Technology, 17, 1438-1449, DOI: 10.1016/j.jmrt.2022.01.085

 

Gopalakrishnan M., Mohamad A.A., Nguyen M.T., Yonezawa T., Qin J., Thamyongkit P., Somwangthanaroj A., Kheawhom S.         Recent advances in oxygen electrocatalysts based on tunable structural polymers, 2022, Materials Today Chemistry, 23, 100632, DOI: 10.1016/j.mtchem.2021.100632

 

Jaherng T., Kheawhom S., Bumroongsri P., Gain-scheduling offline robust predictive controllers for discrete-time systems with varying parameters,2022, International Journal of Dynamics and Control, 10, 1, 260-269, DOI: 10.1007/s40435-021-00805-4

 

Etesami M., Mohamad A.A., Nguyen M.T., Yonezawa T., Pornprasertsuk R., Somwangthanaroj A., Kheawhom S., Benchmarking superfast electrodeposited bimetallic (Ni, Fe, Co, and Cu) hydroxides for oxygen evolution reaction, 2022, Journal of Alloys and Compounds, 889, 161738, DOI: 10.1016/j.jallcom.2021.161738

 

Govindarajan D., Palaniyandy N., Chinnakutti K.K., Nguyen M.T., Yonezawa T., Qin J., Kheawhom S., Sputter-Deposited Binder-Free Nanopyramidal Cr/γ-Mo2N TFEs for High-Performance Supercapacitors, 2022, Nanoscale Research Letters, 17, 1, 65, DOI: 10.1186/s11671-022-03704-5

 

Huang Z., Nguyen M.T., Sim W.J., Takahashi M., Kheawhom S., Yonezawa T., CoxNi1−xO-NiCo2O4/rGO synergistic bifunctional electrocatalysts for high-rate rechargeable zinc-air batteries, 2022, Sustainable Energy and Fuels, DOI: 10.1039/d2se00606e

 

Bakar N.A.A., Salleh N.A., Hamid N.A.A., Abdullah C.A.C., Rahiman W., Basirun W.J., Kheawhom S., Mohamad A.A., The effect different of hydrochloric acid concentrations on the cleaning of Ni foam substrate: Structural and morphological studies, 2022, Materials Today: Proceedings, 60, 1036-1041, DOI: 10.1016/j.matpr.2022.01.227

 

2021

 

Srirachat W., Usapein P., Kheawhom S., Pancharoen U., Selective separation of trace nickel(II) and gold(I) ions via hollow fiber supported liquid membrane enhanced by synergistic extractants D2EHPA/TBP, 2021, Arabian Journal of Chemistry, 14, 12, 103427, DOI: 10.1016/j.arabjc.2021.103427

 

Radenahmad N., Khezri R., Mohamad A.A., Nguyen M.T., Yonezawa T., Somwangthanaroj A., Kheawhom S., A durable rechargeable zinc-air battery via self-supported MnOx-S air electrode, 2021, Journal of Alloys and Compounds, 883, 160935, DOI: 10.1016/j.jallcom.2021.160935

 

Durai G., Kuppusami P., Arulmani S., Anandan S., Khadeer Pasha S., Kheawhom S., Microstructural and electrochemical supercapacitive properties of Cr-doped CuO thin films: Effect of substrate temperature, 2021, International Journal of Energy Research, 45, 14, 20001-20015, DOI: 10.1002/er.7075

 

Benrezgua E., Deghfel B., Mahroug A., Yaakob M.K., Boukhari A., Amari R., Kheawhom S., Mohamad A.A., Experimental and theoretical studies on structural, morphological, electronic, optical and magnetic properties of Zn1-xCuxO thin films (0≤x≤0.125), 2021, Materials Science in Semiconductor Processing, 134, 106012, DOI: 10.1016/j.mssp.2021.106012

 

Ahmad I., Firdaus Mohd Nazeri M., Azmira Salleh N., Kheawhom S., Mustafa Erer A., Kurt A., Azmin Mohamad A.           Selective electrochemical etching of the Sn-3Ag-0.5Cu/0.07 wt% graphene nanoparticle composite solder, 2021, Arabian Journal of Chemistry, 14, 10, 103392, DOI: 10.1016/j.arabjc.2021.103392

 

Olaru S., Stoican F., Kheawhom S., Challenges and opportunities for the control of energy storage systems. a focus on the zinc-air batteries, 2021,IEEE AFRICON Conference, 20-21 September 2021, DOI: 10.1109/AFRICON51333.2021.9571020

 

Kao-ian W., Nguyen M.T., Yonezawa T., Pornprasertsuk R., Qin J., Siwamogsatham S., Kheawhom S., Highly stable rechargeable zinc-ion battery using dimethyl sulfoxide electrolyte, 2021, Materials Today Energy, 21, 100738, DOI: 10.1016/j.mtener.2021.100738

 

Songmueang K., Zhang D., Cao J., Zhang X., Kheawhom S., Sriprachuabwong C., Tuantranont A., Wangyao P., Qin J., Flower-like W/WO3as a novel cathode for aqueous zinc-ion batteries, 2021, Chemical Communications, 57, 61, 7549-7552, DOI:           10.1039/d1cc01612a

 

Jaikrajang N., Kao-Ian W., Muramatsu T., Chanajaree R., Yonezawa T., Al Balushi Z.Y., Kheawhom S., Cheacharoen R., Impact of Binder Functional Groups on Controlling Chemical Reactions to Improve Stability of Rechargeable Zinc-Ion Batteries, 2021, ACS Applied Energy Materials, 4, 7, 7138-7147, DOI:      10.1021/acsaem.1c01214

 

Rittiruam M., Somdee S., Buapin P., Aumnongpho N., Kerdprasit N., Saelee T., Kheawhom S., Chotigkrai N., Praserthdam S., Praserthdam P., On the deactivation mechanisms of MnO2 electrocatalyst during operation in rechargeable zinc-air batteries studied via density functional theory,2021, Journal of Alloys and Compounds, 869, 159280, DOI: 10.1016/j.jallcom.2021.159280

 

Boukhari A., Deghfel B., Mahroug A., Amari R., Selmi N., Kheawhom S., Mohamad A.A., Thickness effect on the properties of Mn-doped ZnO thin films synthesis by sol-gel and comparison to first-principles calculations, 2021, Ceramics International, 47, 12, 17276-17285, DOI: 10.1016/j.ceramint.2021.03.039

 

Salleh N.A., Kheawhom S., Mohamad A.A. Chitosan as biopolymer binder for graphene in supercapacitor electrode, 2021, Results in Physics, 25, 104244, DOI: 10.1016/j.rinp.2021.104244

 

Abdulla J., Cao J., Zhang D., Zhang X., Sriprachuabwong C., Kheawhom S., Wangyao P., Qin J., Elimination of Zinc Dendrites by Graphene Oxide Electrolyte Additive for Zinc-Ion Batteries, 2021, ACS Applied Energy Materials, 4, 5, 4602-4609, DOI: 10.1021/acsaem.1c00224

 

Palanisamy S., Rajendhran N., Srinivasan S., Shyma A.P., Murugan V., Parasuraman B., Kheawhom S., A novel nano-YSZ-Al alloy anode for Al–air battery, 2021, Journal of Applied Electrochemistry, 51, 2, 345-356, DOI: 10.1007/s10800-020-01493-2

 

Etesami M., Mehdipour-Ataei S., Somwangthanaroj A., Kheawhom S.  Recent progress of electrocatalysts for hydrogen proton exchange membrane fuel cells, 2021, International Journal of Hydrogen Energy, DOI: 10.1016/j.ijhydene.2021.09.133

 

Arunkumar P.S., Maiyalagan T., Kheawhom S., Mao S., Jiang Z., Effect of carbon material additives on hydrogen evolution at rechargeable alkaline iron battery electrodes, 2021, Materials Science for Energy Technologies, 4, 236-241, DOI: 10.1016/j.mset.2021.06.007

 

Mohan Kumar A., Rajasekar R., Karthik V., Kheawhom S., Optimization of process parameters of ultrasonic welding on dissimilar metal joints,2021, Archives of Metallurgy and Materials, 66, 3, 887-892, DOI: 10.24425/amm.2021.136394

 

2020

 

Nguyen M.T., Wongrujipairoj K., Tsukamoto H., Kheawhom S., Mei S., Aupama V., Yonezawa T., Synergistic Effect of the Oleic Acid and Oleylamine Mixed-Liquid Matrix on Particle Size and Stability of Sputtered Metal Nanoparticles, 2020, ACS Sustainable Chemistry and Engineering, 8, 49, 18167-18176, DOI: 10.1021/acssuschemeng.0c06549

 

Lao-Atiman W., Olaru S., Diop S., Skogestad S., Arpornwichanop A., Cheacharoen R., Kheawhom S., Linear parameter-varying model for a refuellable zinc-air battery: LPV model for a refuellable ZAB, 2020, Royal Society Open Science, 7, 12, 201107, DOI: 10.1098/rsos.201107rsos201107

 

Abbasi A., Hosseini S., Somwangthanaroj A., Cheacharoen R., Olaru S., Kheawhom S., Discharge profile of a zinc-air flow battery at various electrolyte flow rates and discharge currents, 2020, Scientific Data, 7, 1, 196, DOI:  10.1038/s41597-020-0539-y

 

Tangthuam P., Pimoei J., Mohamad A.A., Mahlendorf F., Somwangthanaroj A., Kheawhom S., Carboxymethyl cellulose-based polyelectrolyte as cationic exchange membrane for zinc-iodine batteries, 2020, Heliyon, 6, 10, e05391, DOI: 10.1016/j.heliyon.2020.e05391

 

Khezri R., Hosseini S., Lahiri A., Motlagh S.R., Nguyen M.T., Yonezawa T., Kheawhom S., Enhanced cycling performance of rechargeable zinc-air flow batteries using potassium persulfate as electrolyte additive, 2020, International Journal of Molecular Sciences, 21, 19, 7303, DOI: 10.3390/ijms21197303

 

Nanthapong S., Kheawhom S., Klaysom C., MCM-41/PVA composite as a separator for zinc-air batteries, 2020, International Journal of Molecular Sciences, 21, 19, 7052, DOI: 10.3390/ijms21197052

 

Yahaya M.Z., Salleh N.A., Kheawhom S., Illes B., Mohd Nazeri M.F., Mohamad A.A., Selective etching and hardness properties of quenched SAC305 solder joints, 2020            Soldering and Surface Mount Technology, 32, 4, 225-233, DOI: 10.1108/SSMT-01-2020-0001

 

Han S.J., Ameen M., Hanifah M.F.R., Aqsha A., Bilad M.R., Jaafar J., Kheawhom S., Catalytic evaluation of nanoflower structured manganese oxide electrocatalyst for oxygen reduction in alkaline media, 2020, Catalysts, 10, 8, 822, DOI: 10.3390/catal10080822

 

Salleh N.A., Kheawhom S., Mohamad A.A., Characterizations of nickel mesh and nickel foam current collectors for supercapacitor application,2020, Arabian Journal of Chemistry, 13, 8, 6838-6846, DOI: 10.1016/j.arabjc.2020.06.036

 

Phusittananan T., Kao-Ian W., Nguyen M.T., Yonezawa T., Pornprasertsuk R., Mohamad A.A., Kheawhom S., Ethylene Glycol/Ethanol Anolyte for High Capacity Alkaline Aluminum-Air Battery With Dual-Electrolyte Configuration, 2020, Frontiers in Energy Research, 8, 189, DOI:10.3389/fenrg.2020.00189

 

Khamsanga S., Nguyen M.T., Yonezawa T., Thamyongkit P., Pornprasertsuk R., Pattananuwat P., Tuantranont A., Siwamogsatham S., Kheawhom S., MnO2 heterostructure on carbon nanotubes as cathode material for aqueous zinc-ion batteries, 2020, International Journal of Molecular Sciences, 21, 13, 4689, DOI: 10.3390/ijms21134689

 

Jirabovornwisut T., Kheawhom S., Chen Y.-S., Arpornwichanop A., Optimal operational strategy for a vanadium redox flow battery, 2020, Computers and Chemical Engineering, 136, 106805, DOI: 10.1016/j.compchemeng.2020.106805

 

Teabnamang P., Kao-Ian W., Nguyen M.T., Yonezawa T., Cheacharoen R., Kheawhom S., High-capacity dual-electrolyte aluminum-air battery with circulating methanol anolyte, 2020, Energies, 13, 9, 2275, DOI: 10.3390/en13092275

 

Corpuz R.D., De Juan-Corpuz L.M., Nguyen M.T., Yonezawa T., Wu H.-L., Somwangthanaroj A., Kheawhom S., Binder-free α-MnO2 nanowires on carbon cloth as cathode material for zinc-ion batteries, 2020, International Journal of Molecular Sciences, 21, 9, 3113, DOI: 10.3390/ijms21093113

 

Zorkipli N.N.M., Yahaya M.Z., Salleh N.A., Purwanto A., Kheawhom S., Kaus N.H.M., Mohamad A.A., Synthesis and electrochemical performance of LiV3O8/graphene for aqueous lithium batteries, 2020, Ionics, 26, 5, 2277-2292, DOI: 10.1007/s11581-019-03303-y

 

2019

 

Abbasi A., Hosseini S., Somwangthanaroj A., Mohamad A.A., Kheawhom S., Correction: Abbasi, A. et al. Poly(2,6-dimethyl-1,4-phenylene oxide)-based hydroxide exchange separator membranes for zinc-air battery. (Int. J. Mol. Sci. 2019, 20, 3678), 2020, International Journal of Molecular Sciences, 21, 2, 377, DOI: 10.3390/ijms21020377

 

Khezri R., Jirasattayaporn K., Abbasi A., Maiyalagan T., Mohamad A.A., Kheawhom S.  Three-dimensional fibrous iron as anode current collector for rechargeable zinc-air batteries, 2020, Energies, 13, 6, 1429, DOI: 10.3390/en13061429

 

Yahaya M.Z., Nazeri M.F.M., Kheawhom S., Illés B., Skwarek A., Mohamad A.A., Microstructural analysis of Sn-3.0Ag-0.5Cu-TiO2 composite solder alloy after selective electrochemical etching, 2020, Materials Research Express, 7, 1, 16583, DOI: 10.1088/2053-1591/ab6b57

 

Poolnapol L., Kao-Ian W., Somwangthanaroj A., Mahlendorf F., Nguyen M.T., Yonezawa T., Kheawhom S., Silver decorated reduced graphene oxide as electrocatalyst for zinc-air batteries, 2020, Energies, 13, 2, 462, DOI: 10.3390/en13020462

 

Hosseini S., Moghaddas H., Masoudi Soltani S., Kheawhom S., Technological Applications of Honeycomb Monoliths in Environmental Processes: A review, 2020, Process Safety and Environmental Protection, 133, 286-300, DOI: 10.1016/j.psep.2019.11.020

 

De Juan-Corpuz L.M., Corpuz R.D., Somwangthanaroj A., Nguyen M.T., Yonezawa T., Ma J., Kheawhom S., Binder-free centimeter-long V2O5nanofibers on carbon cloth as cathode material for zinc-ion batteries, 2019, Energies, 13, 1, en13010031, DOI: 10.3390/en13010031

 

Abbasi A., Nasef M.M., Babadi F.E., Faridi-Majidi R., Takeshi M., Abouzari-Lotf E., Choong T., Somwangthanaroj A., Kheawhom S., Carbon Dioxide Adsorption on Grafted Nanofibrous Adsorbents Functionalized Using Different Amines, 2019, Frontiers in Energy Research, 7, 145, DOI: 10.3389/fenrg.2019.00145

 

Chatrattanawet N., Kheawhom S., Chen Y.-S., Arpornwichanop A., Design and implementation of the off-line robust model predictive control for solid oxide fuel cells, 2019, Processes, 7, 12, 918, DOI: 10.3390/PR7120918

 

Corpuz R.D., De Juan L.M.Z., Praserthdam S., Pornprasertsuk R., Yonezawa T., Nguyen M.T., Kheawhom S. Annealing induced a well-ordered single crystal δ-MnO2 and its electrochemical performance in zinc-ion battery, 2019, Scientific Reports, 9, 1, 15107, DOI: 10.1038/s41598-019-51692-x

 

Hosseini S., Abbasi A., Uginet L.-O., Haustraete N., Praserthdam S., Yonezawa T., Kheawhom S., The Influence of Dimethyl Sulfoxide as Electrolyte Additive on Anodic Dissolution of Alkaline Zinc-Air Flow Battery, 2019, Scientific Reports, 9, 1, 14958, DOI: 10.1038/s41598-019-51412-5

 

Lao-atiman W., Olaru S., Arpornwichanop A., Kheawhom S., Discharge performance and dynamic behavior of refuellable zinc-air battery, 2019, Scientific Data, 6, 1, 168, DOI: 10.1038/s41597-019-0178-3

 

Khamsanga S., Pornprasertsuk R., Yonezawa T., Mohamad A.A., Kheawhom S., δ-MnO2 nanoflower/graphite cathode for rechargeable aqueous zinc ion batteries, 2019, Scientific Reports, 9, 1, 8441, DOI: 10.1038/s41598-019-44915-8

 

Nguyen M.T., Yu K., Tokunaga T., Boonyaperm K., Kheawhom S., Arita M., Yonezawa T., Green Synthesis of Size-Tunable Iron Oxides and Iron Nanoparticles in a Salt Matrix, 2019, ACS Sustainable Chemistry and Engineering, 7, 21, 17697-17705, DOI: 10.1021/acssuschemeng.9b03950

 

Kao-Ian W., Kheawhom S., Olaru S., Identification of zinc-ion battery via equivalent circuit model, 2019, 23rd International Conference on System Theory, Control and Computing, ICSTCC 2019, DOI: 10.1109/ICSTCC.2019.8885484

 

Lao-Atiman W., Kheawhom S., Olaru S., Zinc-air battery dynamics' identification using transfer functions and hammerstein-wiener models, 2019,23rd International Conference on System Theory, Control and Computing, ICSTCC 2019, DOI: 10.1109/ICSTCC.2019.8885521

 

Olaru S., Golovkina A., Lao-Atiman W., Kheawhom S., A mathematical model for dynamic operation of zinc-air battery cells, 2019, DOI: 10.1016/j.ifacol.2019.11.028

 

Saw M.J., Ghosh B., Nguyen M.T., Jirasattayaporn K., Kheawhom S., Shirahata N., Yonezawa T., High Aspect Ratio and Post-Processing Free Silver Nanowires as Top Electrodes for Inverted-Structured Photodiodes, 2019, ACS Omega, 4, 8, 13303-13308, DOI: 10.1021/acsomega.9b01479

 

Abbasi A., Hosseini S., Somwangthanaroj A., Mohamad A.A., Kheawhom S., Poly (2,6-dimethyl-1,4-phenylene oxide)-based hydroxide exchange separator membranes for zinc-air battery, 2019, International Journal of Molecular Sciences, 20, 15, 3678, DOI: 10.3390/ijms20153678

 

De Juan-Corpuz L.M.Z., Nguyen M.T., Corpuz R.D., Yonezawa T., Rosero-Navarro N.C., Tadanaga K., Tokunaga T., Kheawhom S., Porous ZnV2O4 Nanowire for Stable and High-Rate Lithium-Ion Battery Anodes, 2019, ACS Applied Nano Materials, 2, 7, 4247-4256, DOI: 10.1021/acsanm.9b00703

 

Duangsri S., Kheawhom S., Bumroongsri P. A PDE-based data reconciliation approach for systems with variations of parameters, 2019, Engineering Journal, 23, 4          , 157-169, DOI: 10.4186/ej.2019.23.4.157

 

Babadi F.E., Hosseini S., Shavandi A., Moghaddas H., Shotipruk A., Kheawhom S., Electrochemical investigation of amino acids Parkia seeds using the composite electrode based on copper/carbon nanotube/nanodiamond, 2019, Journal of Environmental Chemical Engineering, 7, 2, 102979, DOI: 10.1016/j.jece.2019.102979

 

Abbasi A., Nasef M.M., Kheawhom S., Faridi-Majidi R., Takeshi M., Abouzari-Lotf E., Choong T., Amine functionalized radiation induced grafted polyolefin nanofibers for CO2 adsorption, 2019, Radiation Physics and Chemistry, 156, 58-66, DOI: 10.1016/j.radphyschem.2018.10.015

 

Srirachat W., Maneeintr K., Pancharoen U., Kheawhom S., Isobaric vapor-liquid equilibrium for binary system related to the organophosphoric extractant of D2EHPA + n-dodecane and TBP + n-dodecane at 0.13, 2.40 and 6.67 kPa, 2019, Vacuum, 160, 60-69, DOI: 10.1016/j.vacuum.2018.11.011

 

Kao-Ian W., Pornprasertsuk R., Thamyongkit P., Maiyalagan T., Kheawhom S., Rechargeable zinc-ion battery based on choline chloride-urea deep eutectic solvent, 2019, Journal of the Electrochemical Society, 166, 6, A1063-A1069, DOI: 10.1149/2.0641906jes

 

Lao-atiman W., Bumroongsil K., Arpornwichanop A., Bumroongsakulsawat P., Olaru S., Kheawhom S., Model-based analysis of an integrated zinc-air flow Battery/Zinc Electrolyzer System, 2019, Frontiers in Energy Research, 7, 15, DOI: 10.3389/fenrg.2019.00015

 

2018

 

Hosseini S., Lao-atiman W., Han S.J., Arpornwichanop A., Yonezawa T., Kheawhom S., Discharge Performance of Zinc-Air Flow Batteries Under the Effects of Sodium Dodecyl Sulfate and Pluronic F-127, 2018, Scientific Reports, 8, 1, 14909, DOI: 10.1038/s41598-018-32806-3

 

Hosseini S., Han S.J., Arponwichanop A., Yonezawa T., Kheawhom S., Ethanol as an electrolyte additive for alkaline zinc-air flow batteries, 2018,Scientific Reports, 8, 1, 11273, DOI: 10.1038/s41598-018-29630-0

 

Pirom T., Arponwichanop A., Pancharoen U., Yonezawa T., Kheawhom S., Yttrium (III) Recovery with D2EHPA in Pseudo-Emulsion Hollow Fiber Strip Dispersion System, 2018, Scientific Reports, 8, 1, 7627, DOI: 10.1038/s41598-018-25771-4

 

Hosseini S., Moghaddas H., Soltani S.M., Aroua M.K., Kheawhom S., Yusoff R., Electrochemical bicarbonate reduction in the presence of Diisopropylamine on sliver oxide in alkaline sodium bicarbonate medium, 2018, Journal of Environmental Chemical Engineering, 6, 5, 6335-6343, DOI: 10.1016/j.jece.2018.09.025

 

Srirachat W., Pancharoen U., Kheawhom S., An investigation of saturated vapor pressure regarding low-volatility organophosphorus extractants Di-(2-ethylhexyl) phosphoric acid and tributyl phosphate: Correlation and thermodynamics study, 2018, Vacuum, 156, 237-247, DOI: 10.1016/j.vacuum.2018.07.036

 

Chotipanich J., Abu Bakar S.H., Arponwichanop A., Yonezawa T., Kheawhom S., Copper conductive patterns through spray-pyrolysis of copper-diethanolamine complex solution, 2018, PLoS ONE, 13, 7, e0200084, DOI: 10.1371/journal.pone.0200084

 

Hosseini S., kheawhom S., Masoudi Soltani S., Aroua M.K., Moghaddas H., Yusoff R., Improvement of product selectivity in bicarbonate reduction into formic acid on a tin-based catalyst by integrating nano-diamond particles, 2018, Process Safety and Environmental Protection, 116, 494-505, DOI: 10.1016/j.psep.2018.03.005

 

Chotipanich J., Arpornwichanop A., Yonezawa T., Kheawhom S., Electronic and ionic conductivities enhancement of zinc anode for flexible printed zinc-air battery, 2018, Engineering Journal, 22, 2, 47-57, DOI: 10.4186/ej.2018.22.2.47

 

Hosseini S., Kheawhom S., Soltani S.M., Aroua M.K., Electrochemical reduction of bicarbonate on carbon nanotube-supported silver oxide: An electrochemical impedance spectroscopy study, 2018, Journal of Environmental Chemical Engineering, 6, 1, 1033-1043, DOI: 10.1016/j.jece.2017.12.036

 

Singh A., Khaewhom S., Kaistha N., Design and Control of a Small-Scale Isolated Concentrated Solar Power Generation Unit, 2018, Industrial and Engineering Chemistry Research, 57, 2, 623-638, DOI: 10.1021/acs.iecr.7b02748

 

Kheawhom S., Lao-Atiman W., Modeling and simulation of zinc-air flow battery with zinc regeneration process, 2018, 23rd International Congress of Chemical and Process Engineering, CHISA 2018 and 21st Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction, PRES 2018.

 

Hosseini S., Kheawhom S. Effects of Anionic Surfactant Sodium Dodecyl Sulfate on Electrochemical Performances of Zinc-Air Flow Batteries, 2018, ECS Transactions, 85, DOI: 10.1149/08513.0015ecst

 

Lao-Atiman W., Kheawhom S., Modelling and simulation of zinc-air flow battery with zinc regeneration process, 2018, Chemical Engineering Transactions, 70, 391-396, DOI: 10.3303/CET1870066

 

Jienkulsawad P., Saebea D., Patcharavorachot Y., Kheawhom S., Arpornwichanop A., Analysis of a solid oxide fuel cell and a molten carbonate fuel cell integrated system with different configurations, 2018, International Journal of Hydrogen Energy, 43, 2, 932-942, DOI: 10.1016/j.ijhydene.2017.10.168

 

2017

 

Vongsilodkul S., Kheawhom S., Dynamic simulation of thermal energy storage integrated with small-scale solar power plant and organic Rankine cycle, 2017, Computer Aided Chemical Engineering, 40, 1561-1566, DOI: 10.1016/B978-0-444-63965-3.50262-2

 

Bumroongsri P., Kheawhom S., Robust model predictive control with time-varying tubes, 2017, International Journal of Control, Automation and Systems, 15, 4, 1479-1484, DOI: 10.1007/s12555-016-0227-z

 

Pirom T., Wongsawa T., Wannachod T., Sunsandee N., Pancharoen U., Kheawhom S., Amoxicillin removal from aqueous solutions using hollow fibre supported liquid membrane: Kinetic study, 2017, Chemical Papers, 71, 7, 1291-1302, DOI: 10.1007/s11696-016-0121-4

 

Kheawhom S., Bumroongsri P., Interpolation techniques for robust constrained model predictive control based on polyhedral invariant set, 2017,IMA Journal of Mathematical Control and Information, 34, 2, 501-519, DOI: 10.1093/imamci/dnv057

 

Kheawhom S., Bumroongsri P., Interpolation techniques in robust constrained model predictive control, 2017, AIP Conference Proceedings, 1840,20002, DOI: 10.1063/1.4982260

 

Chatrattanawet N., Hakhen T., Kheawhom S., Arpornwichanop A., Control structure design and robust model predictive control for controlling a proton exchange membrane fuel cell, 2017, Journal of Cleaner Production, 148, 934-947, DOI: 10.1016/j.jclepro.2017.02.033

 

Srirachat W., Wannachod T., Pancharoen U., Kheawhom S., Effect of polarity and temperature on the binary interaction between D2EHPA extractant and organic solvents (kerosene, n-heptane, chlorobenzene and 1-octanol): Experimental and thermodynamics, 2017, Fluid Phase Equilibria, 434, 117-129, DOI: 10.1016/j.fluid.2016.11.029

 

Wongrujipairoj K., Poolnapol L., Arpornwichanop A., Suren S., Kheawhom S., Suppression of zinc anode corrosion for printed flexible zinc-air battery, 2017, Physica Status Solidi (B) Basic Research, 254, 2, 1600442, DOI: 10.1002/pssb.201600442

 

Chaduang S., Lao-Atiman W., Kheawhom S., Improving performance and cyclability of printed flexible zinc-air batteries using carbopol gel electrolyte, 2017     , ECS Transactions, 77, 1, 55-62, DOI: 10.1149/07701.0055ecst

 

Lao-Atiman W., Julaphatachote T., Boonmongkolras P., Kheawhom S., Printed transparent thin film Zn-MnO2 battery, 2017, Journal of the Electrochemical Society, 164, 4, A859-A863, DOI: 10.1149/2.1511704jes

 

2016

 

Bumroongsri P., Kheawhom S., An Off-Line Formulation of Tube-Based Robust MPC Using Polyhedral Invariant Sets, 2016, Chemical Engineering Communications, 203, 6, 736-745, DOI: 10.1080/00986445.2015.1089402

 

Suren S., Limkitnuwat W., Benjapongvimon P., Kheawhom S. Conductive film by spray pyrolysis of self-reducing copper-silver amine complex solution, 2016, Thin Solid Films, 607, 36-42, DOI: 10.1016/j.tsf.2016.03.040

 

Wannachod T., Wongsawa T., Ramakul P., Pancharoen U., Kheawhom S., The synergistic extraction of uranium ions from monazite leach solution via HFSLM and its mass transfer, 2016, Journal of Industrial and Engineering Chemistry, 33, 246-254, DOI: 10.1016/j.jiec.2015.10.006

 

Kheawhom S., Suren S., Printed air cathode for flexible and high energy density zinc-air battery, 2016, MRS Advances, 1, 53, 3585-3591, DOI: 10.1557/adv.2016.443

 

Suren S., Kheawhom S., Development of a high energy density flexible zinc-air battery, 2016, Journal of the Electrochemical Society, 163, 6,A846-A850, DOI: 10.1149/2.0361606jes

 

2015

 

Srirachat W., Wongsawa T., Sunsandee N., Pancharoen U., Kheawhom S., Phase equilibrium for ternary liquid systems of water+di-(2-ethylhexyl)phosphoric acid+organic diluents: Thermodynamic study, 2015, Fluid Phase Equilibria, 401, 34-47, DOI: 10.1016/j.fluid.2015.05.017

 

Chaturabul S., Srirachat W., Wannachod T., Ramakul P., Pancharoen U., Kheawhom S., Separation of mercury(II) from petroleum produced water via hollow fiber supported liquid membrane and mass transfer modeling, 2015, Chemical Engineering Journal, 265, 34-46, DOI: 10.1016/j.cej.2014.12.034

 

Bumroongsri P., Kheawhom S., Optimal dosing of breast cancer chemotherapy using robust MPC based on linear matrix inequalities, 2015,Engineering Journal, 19, 1, 97-106, DOI: 10.4186/ej.2015.19.1.97

 

Chatrattanawwet N., Kheawhom S., Arpornwichanop A., Robust Model Predictive Control Strategy for LTV and LPV Systems of the Internal Reforming Solid Oxide Fuel Cell, 2015, Computer Aided Chemical Engineering, 37, 1733-1738, DOI: 10.1016/B978-0-444-63577-8.50134-0

 

Bumroongsri P., Lersbamrungsuk V., Kheawhom S., Off-Line Tube-Based Robust Model Predictive Control for Uncertain and Highly Exothermic Polymerization Processes, 2015, Computer Aided Chemical Engineering, 37, 1709-1714, DOI: 10.1016/B978-0-444-63577-8.50130-3

 

Chiewchanchairat K., Bumroongsri P., Lersbamrungsuk V., Apornwichanop A., Kheawhom S., Implementation of Model Predictive Control in Industrial Gasoline Desulfurization Process, 2015, Computer Aided Chemical Engineering, 37, 1619-1624, DOI: 10.1016/B978-0-444-63577-8.50115-7

 

Chaturabul S., Wannachod T., Leepipatpiboon N., Pancharoen U., Kheawhom S., Mass transfer resistance of simultaneous extraction and stripping of mercury(ii) from petroleum produced water via HFSLM, 2015, Journal of Industrial and Engineering Chemistry, 21, 1020-1028, DOI: 10.1016/j.jiec.2014.05.011

 

2014

 

Kheawhom S., Bumroongsri P., Interpolation-based robust constrained model predictive output feedback control, 2014, 22nd Mediterranean Conference on Control and Automation, DOI: 10.1109/MED.2014.6961404

 

Kheawhom S., Bumroongsri P., Robust distributed framework of interpolation-based control for polytopic uncertain systems, 2014, 19thInternational Conference on Methods and Models in Automation and Robotics, DOI: 10.1109/MMAR.2014.6957377

 

Suren S., Pancharoen U., Kheawhom S., Simultaneous extraction and stripping of lead ions via a hollow fiber supported liquid membrane: Experiment and modeling, 2014, Journal of Industrial and Engineering Chemistry, 20, 4, 2584-2593, DOI: 10.1016/j.jiec.2013.10.045

 

Bumroongsri P., Kheawhom S., Interpolation-based off-line robust MPC for uncertain polytopic discrete-time systems, 2014, Engineering Journal,18, 1, 87-104, DOI: 10.4186/ej.2014.18.1.87

 

Komkrajang T., Kheawhom S., Paengjuntuek W., Arpornwichanop A., Design of model predictive control for butyl acetate production in reactive distillation, 2014, Chemical Engineering Transactions, 39, 427-432, DOI:  10.3303/CET1439072

 

Panuthai N., Savanglaa R., Praserthdam P., Kheawhom S., Characterization of copper-zinc nanoparticles synthesized via submerged arc discharge with successive reduction process, 2014, Japanese Journal of Applied Physics, 53, 5, 05HA11, DOI: 10.7567/JJAP.53.05HA11

 

Arpornwichanop A., Boonpithak N., Kheawhom S., Ponpesh P., Authayanun S., Performance Analysis of a Biomass Supercritical Water Gasification Process under Energy Self-sufficient Condition, 2014, Computer Aided Chemical Engineering, 33, 1699-1704, DOI: 10.1016/B978-0-444-63455-9.50118-5

 

Bumroongsri P., Kheawhom S., Off-line robust constrained MPC for linear time-varying systems with persistent disturbances, 2014, Mathematical Problems in Engineering, 2014, 936093, DOI: 10.1155/2014/936093

 

Kheawhom S., Bumroongsri P., Modeling of a small-scale biomass updraft gasifier, 2014, Chemical Engineering Transactions, 37, 217-222, DOI:10.3303/CET1437037

 

Kheawhom S., Panyarueng P., Synthesis and characterization of copper-silver core-shell nanoparticles by polyol successive reduction process,2014, Materials Research Society Symposium Proceedings, 1630, DOI: 10.1557/opl.2014.83

 

2013

 

Suren S., Sunsandee N., Stolcova M., Hronec M., Leepipatpiboon N., Pancharoen U., Kheawhom S., Measurement on the solubility of adipic acid in various solvents at high temperature and its thermodynamics parameters, 2013, Fluid Phase Equilibria, 360, 332-337, DOI: 10.1016/j.fluid.2013.10.003

 

Kheawhom S., Foithong K., Comparison of reactive inkjet printing and reactive sintering to fabricate metal conductive patterns, 2013, Japanese Journal of Applied Physics, 52, 5, 05DB14, DOI: 10.7567/JJAP.52.05DB14

 

Chuachuensuk A., Paengjuntuek W., Kheawhom S., Arpornwichanop A., A systematic model-based analysis of a downer regenerator in fluid catalytic cracking processes, 2013, Computers and Chemical Engineering, 49, 136-145, DOI: 10.1016/j.compchemeng.2012.10.003

 

Kongsumrit P., Kheawhom S., Thermal stability of thiolate self-assembled monolayers on copper surface, 2013, Advanced Materials Research,646, 18-23, DOI: 10.4028/www.scientific.net/AMR.646.18

 

Bumroongsri P., Kheawhom S., Interpolation-based Off-line MPC for LPV systems, 2013, IFAC Proceedings Volumes (IFAC-PapersOnline), 46, 32, 81-86, DOI: 10.3182/20131218-3-IN-2045.00059

 

Kheawhom S., Bumroongsri P., Robust MPC based on polyhedral invariant sets for LPV systems, 2013, IFAC Proceedings Volumes (IFAC-PapersOnline), 10, 355-360, DOI: 10.3182/20131218-3-IN-2045.00129

 

Bumroongsri P., Kheawhom S., An interpolation-based robust MPC algorithm using polyhedral invariant sets, 2013, European Control Conference, 6669124, 3161-3166, DOI: 10.23919/ecc.2013.6669124

 

Kheawhom S., Bumroongsri P., Constrained robust model predictive control based on polyhedral invariant sets by off-line optimization, 2013,Chemical Engineering Transactions, 32, 1417-1422, DOI: 10.33032/CET1332237

 

Bumroongsri P., Witchayanuwat W., Kheawhom S., Experimental heat transfer coefficients of waste heat recovery unit in detergent manufacturing process, 2013, Experimental Heat Transfer, 26, 1, 114-125, DOI: 10.1080/08916152.2012.657742

 

2012

 

Bumroongsri P., Kheawhom S., Simultaneous estimation of thin film thickness and optical properties using two-stage optimization, 2012, Journal of Global Optimization, 54, 3, 583-597, DOI: 10.1007/s10898-011-9778-y

 

Bumroongsri P., Kheawhom S., A polyhedral off-line robust MPC strategy for uncertain polytopic discrete-time systems, 2012, Engineering Journal, 16, 4, 73-89, DOI: 10.4186/ej.2012.16.4.73

 

Bumroongsri P., Kheawhom S., An off-line robust MPC algorithm for uncertain polytopic discrete-time systems using polyhedral invariant sets,2012, Journal of Process Control, 22, 6, 975-983, DOI: 10.1016/j.jprocont.2012.05.002

 

Bumroongsri P., Kheawhom S., MPC for LPV systems based on parameter-dependent Lyapunov function with perturbation on control input strategy, 2012, Engineering Journal, 16, 2, 61-72, DOI: 10.4186/ej.2012.16.2.61

 

Bumroongsri P., Kheawhom S., An ellipsoidal off-line model predictive control strategy for linear parameter varying systems with applications in chemical processes, 2012, Systems and Control Letters, 61, 3, 435-442, DOI: 10.1016/j.sysconle.2012.01.003

 

Bumroongsri P., Kheawhom S., Improving the performance of robust MPC using the perturbation on control input strategy based on nominal performance cost, 2012, Procedia Engineering, 42, 1027-1037, DOI: 10.1016/j.proeng.2012.07.494

 

Bumroongsri P., Kheawhom S., An ellipsoidal off-line robust model predictive control strategy for uncertain polytopic discrete-time systems, 2012,IFAC Proceedings Volumes (IFAC-PapersOnline), 45, 25, 268-273, DOI: 10.3182/20120913-4-IT-4027.00018

 

Bumroongsri P., Kheawhom S., Robust constrained MPC based on nominal performance cost with applications in chemical processes, 2012,Procedia Engineering, 42, 1561-1571, DOI: 10.1016/j.proeng.2012.07.549

 

Bumroongsri P., Kheawhom S., The polyhedral off-line robust model predictive control strategy for uncertain polytopic discrete-time systems,2012, IFAC Proceedings Volumes (IFAC-PapersOnline), 45, 15, 655-660, DOI: 10.3182/20120710-4-SG-2026.00017

 

Bumroongsri P., Kheawhom S., MPC for LPV systems using perturbation on control input strategy, 2012, Computer Aided Chemical Engineering,31, 350-354, DOI: 10.1016/B978-0-444-59507-2.50062-7

 

2010

 

Kheawhom S., Efficient constraint handling scheme for differential evolutionary algorithm in solving chemical engineering optimization problem,2010, Journal of Industrial and Engineering Chemistry, 16, 4, 620-628, DOI: 10.1016/j.jiec.2010.03.004

 

2009

 

Preechakul C., Kheawhom S., Modified genetic algorithm with sampling techniques for chemical engineering optimization, 2009, Journal of Industrial and Engineering Chemistry, 15, 1, 110-118, DOI: 10.1016/j.jiec.2008.09.003

 

2005

 

Kheawhom S., Kittisupakorn P., Multi-objective design space exploration under uncertainty, 2005, Computer Aided Chemical Engineering, 20C,145-150, DOI: 10.1016/S1570-7946(05)80146-4

 

2004

 

Kheawhom S., Hirao M., Decision support tools for environmentally benign process design under uncertainty, 2004, Computers and Chemical Engineering, 28, 9, 1715-1723, DOI: 10.1016/j.compchemeng.2004.01.005

 

Kheawhom S., Hirao M., Environmentally benign separation process synthesis, 2004, Journal of Chemical Engineering of Japan, 37, 2, 243-252, DOI: 10.1252/jcej.37.243

 

2003

 

Kheawhom S., Hirao M., A methodology for environmentally benign process design under uncertainty, 2003, Computer Aided Chemical Engineering, 15C, 870-875, DOI: 10.1016/S1570-7946(03)80416-9

 

2002

 

Kheawhom S., Hirao M., Decision support tools for process design and selection, 2002, Computers and Chemical Engineering, 26, 747-755, DOI: 10.1016/S0098-1354(01)00798-0

 

2001

 

Kheawhom S., Hirao M., Decision support tools for process design and selection, 2001, Computer Aided Chemical Engineering, 9C, 1023-1028, DOI: 10.1016/S1570-7946(01)80164-4